Trading Tech Innovation

• Working coin list
  BTC / ETH / LINK / MINA / ATOM / VET / ALGO / NEXO / UNI / XMR / HBAR / EGLD / ZEC / ADA / RUNE / AAVE / AVAX / NEAR / CKB / QNT / NEO / GMX / OP / MATIC / LDO / GRT / RNDR / KAVA / XRP* / XLM* / SOL* / EOS* / ZEN* / SNX* / DOT* / FLOW* / CRV* / COMP* / ETC* / ASTR / ARB / BNB / INJ / LTC / DASH / THETA / BCH / OMG / XTZ / MKR / IMX / FTM / XEC / CHZ
  *: with StopLoss ratio and filters
  /!\ All are for USDT pair on Binance on 1H
• - Entry Mode
  Allows you to select entry conditions
  > No condition: Will not use any filters
  > Individual Filter: Can only enter a position if one of the filters allows it
  > Combo Filter: Can only enter a position if at least two filters allow it (if you check filters, then all of them must allow it, and so on)
  
  You can activate or deactivate them, as well as change filter values using dedicated inputs to refine your results
  Backtest Date Range: This parameter enables you to view results over specific periods
  It's highly useful, even mandatory, when using the "Equity" mode
  If you're using an Equity-based quantity mode, it will add the previous gains' amount to each new bet, in addition to your initial stake
  However, when you launch the strategy live with your capital, you'll need to reset the stakes to the starting capital (to avoid beginning with overly large sums)
  It's strongly advised to test the Equity mode with a small Initial Capital (to verify the initial trade's stake when taken live)
  To do this, when creating the TradingView alert: From the strategy settings, please check "Use Start" and set the "StartDate" to the day's date before creating the alert (once you've made all your adjustments on Finandy with the tutorial below)
• - Quantity
  Quantity mode
  Allows you to choose between
  > Equity: This takes the starting value of your Initial Capital in the Properties and adds gains from each new trade If you're launching the Equity mode live, set the "backtest date range" to the launch day's date before creating the alert
  > Fixed: This mode uses a fixed amount for each new opened trade
  
  - Quantity type
  You can choose between
  > Amount: Represents an amount to invest in $
  > Contract: Represents a quantity to invest in contracts (or lots)
  
  - Amount Quantity to buy
  Defines the quantity to invest in $ (e.g.: $1000)
  Contract Quantity to buy: Defines the quantity to invest in the number of contracts (e.g.: 2 BTC)
  Divide Quantity by new open trade at the same time
  This option divides investments by each new trade opening when a trade is already active
  > For Equity mode, this option won't invest the entire Equity (or Initial Capital) with each trade but can go up to the maximum investment amount if multiple trades are open
  > For Fixed mode, this option divides your fixed amount (Amount or Contract) by the number of open trades (e.g.: if $1200 investment and 3 open trades, $400 per trade)
  Disabling this option will use the total value of your Equity or Fixed for each new trade (even if there are already one or more open trades)
  Ensure you have sufficient funds to open multiple trades simultaneously
  Divide Quantity by Close
  This function is an alternative to the first feature and is calculated differently You can choose either:
  > None (leave both options unchecked)
  > Divide Quantity by new open trade at the same time
  > Divide Quantity by Close
  Note: You can't activate both options simultaneously
• - Divide Volume to match Broker ratio
  Lets you apply a ratio to the final quantity, which will be divided and sent to the broker with Metaconnector or the exchange
  Broker Quantity Coef: Similar to other strategies, this mode divides the amount sent when creating an alert
  It's useful when using Metaconnector with Brokers that have different specifications for the number of TradingView lots (e.g., for XAU: on TradingView, 1 contract = 1 lot, but on your Broker, 1 contract = 100 lots, so you would put 100 in the Broker Quantity Coef)
• - Coef SL
  Adds a variable StopLoss coefficient
  You can vary the StopLoss from a ratio of 1 to 100
  Use Coef SL as a direct SL value for all: Adds a fixed StopLoss that will be the same for all positions
  You can vary the StopLoss from a ratio of 1 to 100
  Adding a StopLoss might reduce your NetProfit but will add long-term security
  To maintain a dynamic StopLoss, leave the value at 0

• Use Metaconnector to link the strategy to Metatrader
• Use Finandy, Alertatron, 3Commas, or ProfitView to automate trading with our Place Orders system

• Binance connection : You can connect and trade with your binance Spot or Future account via the API section at https://docs.finandy.com/exchange/binance/api-key
• Create an account on Finandy then follow the screens below
  Info: the volume is calculated with the leverage = you must put the total volume: example $10,000 in the volume with a leverage of 10 = real bet of $1000
  In method 1, the close tab must be deactivated
  If you use the dynamic order size you must select "Strategy" instead of "Volume" = will automatically set the strategy volume from TradingView
• Click on the "Signals" tab
• Click on the icon "+" on the left of the screen, Then set the Left part concerning the Tickers etc. (Please take example on the picture but change the symbol according to your symbol that you trade with our script (To check the name of the Symbol please look at the name of the Pair on Finandy : example : ETHUSDT)
  WARNING : Put "Strategy" for an Automatic definition of a Long or Short Signal
• Under source, select "TradingView Strategy"
• Name: Enter the desired name, for example: XRP LONG
• Pairs: Enter the pair name, for example, XRPUSDT (make sure the pair is available on Finandy or Binance API)
• In the "Open" tab, configure as follows
  - Enable: True
  - Single order
  - Real
  - Strategy amount (will take the quantity you've set in the TradingView strategy)
  - Order type: Market
  - Position side: "Long Only" for Long strategies, "Short Only" for Short strategies, or "Strategy" (which will automatically detect the direction)
  - You can also set the Leverage
  - It's recommended to activate the "Isolated" mode
• In the DCA tab
  - Activate "Enable" using the button on the right
  - Choose "Strategy amount" instead of "Amount"
  - Select "Market" instead of "Floating"
  - Deactivate "Averaging with opened CA" using the button on the right
• In the "Close" tab
  - By default, it's activated (keep it activated)
  - In "Order type," choose "Market"
  - Then below, choose "Close position completely"
• Save the Signal using the "Save" button
• Copy the "Signal Message" and paste it into the strategy settings in the "Custom Alerts" section under "Long entry" and "Long exit" for a Long strategy, or under "Short entry" and "Short exit" for a Short strategy. Don't forget to check the checkboxes to the right of the Entry and Exit sections for Long or Short, depending on the strategy you've set up
• Confirm, then return to Finandy to copy the Signal URL (and activate your Signal on Finandy if not done yet)
• Go back to TradingView, create an Alert, select the strategy, give it a name (e.g., XRP Long), then go to "Notifications," check "Webhook URL," and paste the Signal URL
• Press "Create" and you're done
• - Existing placeholders
  #direction#
  #symbol#
  #quantity#
  #buyPrice#
  #tpPrice#
  #slPrice#
  #tp1Price#
  #tp2Price#
  #tpPriceBe1#
  #tpPriceBe2#
  
  /!\ Please check placeholders names, because they may change between versions

/!\ Be careful, you have to create two signals, one for [Setup mode OPEN] and one for [Setup mode CLOSE]

---

• Binance connection : You can connect and trade with your binance Spot or Future account via the API section at https://docs.finandy.com/exchange/binance/api-key
• Create an account on Finandy then follow the screens below
  Info: the volume is calculated with the leverage = you must put the total volume: example $10,000 in the volume with a leverage of 10 = real bet of $1000
  In method 1, the close tab must be deactivated
  If you use the dynamic order size you must select "Strategy" instead of "Volume" = will automatically set the strategy volume from TradingView
• Click on "Signals"
• Click on the "+" at the top left of the screen
• Under source, select "TradingView Strategy"
• Name: Enter the desired name, for example:
  [Setup mode OPEN]
  XRP OPEN
  [Setup mode CLOSE]
  XRP CLOSE
• Pairs: Enter the pair name, for example, XRPUSDT (make sure the pair is available on Finandy or Binance API)
• In the "Open" tab:
  [Setup mode OPEN]
  - Enable: True
  - Single order
  - Real
  - Strategy amount (will take the quantity you've set in the TradingView strategy)
  - Order type: Market
  - Position side: "Strategy" (which will automatically detect the direction)
  - You can also set the Leverage
  - It's recommended to activate the "Isolated" mode
  [Setup mode CLOSE]
  - Uncheck and disable this tab: "Enable: False"
• In the "Close" tab:
  [Setup mode OPEN]
  - Uncheck and disable this tab: "Enable: False"
  [Setup mode CLOSE]
  - By default, it's activated (keep it activated): "Enable: True"
  - In "Order type" choose "Market"
  - Then below, choose "Close position completely"
• In the DCA tab
  [Setup mode OPEN]
  - Activate "Enable" using the button on the right
  - Choose "Strategy amount" instead of "Amount"
  - Select "Market" instead of "Floating"
  - Deactivate "Averaging with opened CA" using the button on the right
• Save the Signal using the "Save" button and activate your Signal on Finandy
• Copy the "Signal Message" and paste it into the strategy settings in the "Custom Alerts" section under
  [Setup mode OPEN]
  "Long entry" and "Short entry"
  - Don't forget to check the checkboxes to the right of the Entry long and Entry short sections for Long & Short
  [Setup mode CLOSE]
  "Long exit" and "Short exit"
  - Don't forget to check the checkboxes to the right of the Exit long and Exit short sections for Long & Short
• Confirm, then return to Finandy to copy the Signal URL (and activate your Signal on Finandy if not done yet)
• Go back to TradingView, create an Alert, select the strategy, give it a name, then go to "Notifications" check "Webhook URL" and paste the Signal URL
  [Setup mode OPEN]
  For example: XRP CLOSE
  [Setup mode CLOSE]
  For example: XRP CLOSE
• Click "Create" to create your alert

• - To increase a result or reduce a drawdown (Normal)
  Add Multi TP (for example: 40% reached = 20% position sold)
  Activate Custom in Dynamic Order Size with for example 20 for loose and 20 for win (or 25 and 25, or 30 and 30) and do your tests
• Depends on options you have :
  - Boost your results and reduce your risks (Dynamic)
  - Utilize the "Pyramid" category and adjust the fields : "Pyramiding," "Starter," and "Coef"
  - Adjust the Sensibility of the Dynamic
  - Activate and Adjust filter values
  - Vary the Sources in the Filters (Open, Close, etc.)
  - Use Multi TimeFrames filters
  - Activate the various "Force Close" options in the filters
  - Enable "Use safe mode"
  - Employ the Wait function (set the number of wait bars)
  - Utilize Individual Mode by checking one filter at a time for testing
  - Enable the option: "Prevent open if previous bar was blocked" (adjust the "Decal")
  - Activate Only Longs or Only Shorts or both

• If You Want to Optimize Your Own Strategy with Our Algos
  - To optimize a strategy, it's essential to consider some key information
  - Avoid Overfitting = You shouldn't achieve good results over a global period by applying filters
  - To avoid overfitting: Use our Chrome Extension Optimizer and utilize the HeatMap option
  - Then, break down your optimizations by year using the "Backtest Date Range" with the same variations of values in the inputs
  - Example: First Optimization 2020, Second Optimization 2021, etc.
  - Begin by optimizing only the setting fields of the selected "Entry Mode"
  - The HeatMap option allows you to compare two input fields and see the values that yield the best results (this can be based on Profit Factor, Sharpe Ratio, etc.)
  - We recommend analyzing the Profit Factor first
  - Once optimizations are done for different periods, you should look at the inputs that give the best results across all the different periods
  - Then you can do the same with an activated filter and optimize your best settings one filter at a time per year (and only vary the filter values, not the entry mode)
  - Please be cautious with each filter application, if possible, backtest your new results

• - No Data
  If you enable the trailing stop, you must set the percentage level of the gap for your trailing stop when the price hits the Take Profit
  Please switch between different Timeframes and back to the one specified in the strategy and wait for loading
  Repeat the operation until you see the strategy
• - If you don't have the same results ?
  Please check the information you have when selecting the strategy:
  - Symbol (example: USDT.P, XAUUSD, etc.)
  - The source (Binance, Oanda, etc.)
  - Timeframe (1 hour, 30 minutes, etc.)
  Please note that over time the results may vary

One of the key advantages of our platform is the provision of crypto signals.
Our expert signal traders analyze the market meticulously, providing you with timely and accurate some powerfuls algorithms signals for forex and crypto trading.
Whether you're interested in crypto binance signals, futures crypto tips, or forex trading signals, we have you covered.
Our scripts keep you updated with the latest market trends and insights, ensuring you make well-informed trading decisions.

Additionally, we offer a comprehensive crypto trading algos on TradingView equipped with advanced features like crypto strategies and crypto indicators.
These tools empower you to conduct in-depth analyses, enabling strategic and profitable trading.
Moreover, our platform integrates seamlessly with Binance trading, allowing you to connect and access the top exchanges for crypto trading.
You can engage in day trading crypto, explore cryptocurrency futures trading, and discover the most profitable crypto trading strategies, all in one place.

Explore various stocks strategies including NYSE: DASH, NASDAQ: NEGG,NYSEARCA: VIXY, META, AAPL, AMZN, TSLA, SP500 and US30.
Stay updated on Consumer Durables Stocks and Consumer Non-Durables.
Implement effective trading strategies with platforms like Trading Tech Innovation.

Whether you're interested in automated stock, crypto, commodities trading, day trading, or long-term investments, Trading Tech Innovation platform provide the necessary tools and resources for successful trading endeavors.
Stay informed, trade strategically, and maximize your profits with these advanced trading platforms".

Interested in ICT trading strategies?
Our platform offers cutting-edge ICT trading insights, providing you with a strategic advantage in the market.
Additionally, we provide access to private strategies TradingView charts, enabling you to analyze market trends effectively.

Have you heard about the revolutionary Smart Money Concept?
We delve deep into Smart Money Concepts, offering valuable knowledge and resources to enhance your trading prowess.
Our platform use various trading techical like SMC Trading, allowing you to execute trades effortlessly.

Join us today and gain access to exclusive benefits, including free Forex day trading signals and free crypto trading signals.
Our platform is your gateway to a world of trading opportunities.
Don't miss out – sign up now and elevate your trading experience!